| Features 1. Beautiful appearance and consolidated structure. Embedded stands, easy to disassembly, light body and convenient to load on the table without stands. 2. Available of 25/30/40W CO2 glass laser tube, easy to engrave on bamboo, ABS plastic sheet, acrylic etc materials, excellent engraving effect. 3. Red- light pointer function. It can easily find out the original start position on the materials. Especially the small piece and round object. It can realize saving materials and easily to operate. In addition, it can also engrave rubber stamp. 4. Adjustable work table, it makes use easy to load different thickness materials on the work table. 5. Parallel Interface, easy to operate. 6. The machine is capable of embedding control software into PHOTOSHOP, CORALDRAW etc software and directly output from those software, easy and quick. 7. Optionally rotating units, suitable to engrave cylinder objects. 8. Optionally air filter device. It can filtrate the hazardous exhaust and make the gas clean, realizing environmental protection purpose. Technical Specifications MODEL | R60 | Working Area (mm) | 610*450*250 | Table(mm) | 800*540 | Function | Engrave/cut | Engraving Speed(mm/s) | 1500 | Resolution Ratio | 0.025 | Laser | Glass tube made in China 25/40W | Grass Power | 500-2000W | Volume(mm) | 1000*920*1040 | Net weight(kg) | 120 | Bigger Rotating Unit | Φ8-100mm | Smaller Rotating Unit | Φ5-20mm |
*working area means the largest picture the machine can finish in cutting function *rotating unit is an additional equipment |
